Zmeny v UKHAS prediktore

Sondemonitor, mapy a iný software

Zmeny v UKHAS prediktore

Poslaťod Radim_OM2AMR » Pia 12. Júl 2013 19:16:23

Daniel Richman z UKHAS napisal :

Hi everyone,

TL;DR: the predictor now works, and works very quickly at that!
http://predict.habhub.org (the old address redirects). While I've been
quite careful to make sure it behaves exactly the same as the old
predictor, it's a mix of old and relatively new software so should
perhaps be regarded as beta.
(It's also maybe worth reminding you that no guarantee is given for
the accuracy of any data included or produced by this program, use it
at your own risk.)


(not TL;DR - What follows is a brief tale of the problems of prediction:)

As you've no doubt aware, the predictor has been a little bit broken
over the last week.
This was, as almost every problem with the predictor is, due to the
NOAA wind data servers. (Though, we are of course very grateful for
them providing wind data for free :-).)

The predictor used to use their OPeNDAP servers. It's basically a Java
(and therefore slow) web application; we would ask it "can I have wind
data in this latitude/longitude range please". We've had some minor
issues with them (e.g., "blah is not an available dataset" due to its
domain resolving to two IP addresses with a very low TTL), but it was
generally OK. However, over the last week they've become too slow for
the predictor to get any wind data at all.

It turns out you can just wget the the entire forecast off a NOAA
HTTP/FTP server - so that's what we're doing now. Every 6 hours a
daemon downloads ~6-7GB - the entire forecast - and decompresses it
for the predictor to use. As a result, predictions complete
near-instantly; sometimes taking a second or two to bring the data
from disk into RAM, or if you're lucky and it's cached, about 20
milliseconds.

I've upgraded the predictor and spacenearus' live predictions. I will
upgrade the hourly predictor soon (though am going on holiday
shortly...), however, the 8GB download may be prohibitive to people
running their own hourly predictors. Luckily, since we now have
worldwide data on the habhub servers, we can start running hourly
predictions for anyone that wants them ourselves. I'll email when this
is ready.

It's worth noting that if you want a copy of the dataset yourself, it
might be better if we mirror it for you. Several benefits:

- the habhub.org servers (perhaps owing to us having gigabit, maybe
due to less load) are faster than the NOAA HTTP server
- only 25% of the 8GB download is actually useful, so we can mirror a
compressed 1.8G file.
- reduce load on the NOAA servers, because we're nice people

I'll have to double check that this is legal first. Let us know
(#habhub FreeNode, ukhas-tools@googlegroups.com) if you're interested.

This upgrade was actually part of larger CUSpaceflight work on
rewriting the predictor (replacing bits one at a time), which was
going to happen later; replacement of the wind downloading bit was
brought forward since the current one wasn't working.

Thanks,
Daniel
Obrázok užívateľa
Radim_OM2AMR
 
Príspevky: 131
Registrovaný: Pon 31. Okt 2011 17:18:51
Bydlisko: Vrbove, Brunovce

Re: Zmeny v UKHAS prediktore

Poslaťod PE2G » Ned 10. Máj 2015 10:26:47

Hello all,

I don't know if this has been posted here before: There is an Hourly Predictor for Praha:

http://predict.habhub.org/hourly/praha

Please let me know if the burst altitude, ascent and descent rates need to be changed.

Regards,

Frits PE2G
| PE2G | JO32HI | Realistic Pro-2035 | Icom IC-R5 | Yaesu FT-790R | Carant ABY7LB |
PE2G
 
Príspevky: 3
Registrovaný: Uto 23. Apr 2013 11:40:41
Bydlisko: JO32HI, Holandsko

Re: Zmeny v UKHAS prediktore

Poslaťod Marty » Ned 10. Máj 2015 13:04:45

Hello Frits,
Good job! Thank you very much for posting the link. I really like this kind of predictor output.
The ascent rate is OK.
The descent rate needs a correction definitely as Praha launches RS92-SPGL without parachute and the landing speed is usually -12 to -16m/s (depends on residual latex size). I mostly enter -15m/s.
I also recommend to increase the burst altitude a bit. 34000m seems to me as the most reliable estimation.
Kind regards,

Marty
Obrázok užívateľa
Marty
 
Príspevky: 67
Registrovaný: Ned 30. Mar 2014 8:56:39
Bydlisko: Ondřejov (JN79JV)

Re: Zmeny v UKHAS prediktore

Poslaťod PE2G » Ned 10. Máj 2015 17:18:31

Hi Marty,

Thanks for the corrections. The descent rate and burst altitude have been changed to -15 m/s and 34 km.

Please don't hesitate to contact me if these values have to be changed again.

Regards,
Frits PE2G
Naposledy upravil PE2G dňa Štv 14. Máj 2015 9:44:28, celkovo upravené 1
| PE2G | JO32HI | Realistic Pro-2035 | Icom IC-R5 | Yaesu FT-790R | Carant ABY7LB |
PE2G
 
Príspevky: 3
Registrovaný: Uto 23. Apr 2013 11:40:41
Bydlisko: JO32HI, Holandsko

Re: Zmeny v UKHAS prediktore

Poslaťod PE2G » Pon 11. Máj 2015 18:14:23

Hello,

Daniel Richman (UKHAS) has kindly added two stations:

Prostějov: http://predict.habhub.org/hourly/prostejov

Budapest: http://predict.habhub.org/hourly/budapest

Current parameters for both stations are:

Ascent rate: 5 m/s
Descent rate: -15 m/s
Burst altitude: 34000 m

Please let me know if the parameters need to be changed.

Regards,
Frits PE2G
| PE2G | JO32HI | Realistic Pro-2035 | Icom IC-R5 | Yaesu FT-790R | Carant ABY7LB |
PE2G
 
Príspevky: 3
Registrovaný: Uto 23. Apr 2013 11:40:41
Bydlisko: JO32HI, Holandsko


Späť na Software

Kto je on-line

Užívatelia prezerajúci fórum: Žiadny registrovaný užívateľ nie je prítomný a 1 hosť